KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 61

12. Fine adjust the device's height and adjust patient's head position/orientation using
the patient positioning lights as guides.
NOTICE! To ensure optimal image quality, pay attention to the correct
patient positioning.
NOTICE! You can open the mirror and use it to help in positioning the
patient. Close the mirror before you start the imaging.
• The patient's occlusal plane should be horizontal and the ROI is between the top
and bottom FOV lights.
NOTICE! You may place a cotton roll or similar between the patient's front
teeth to separate the jaws.
13. Check that the patient's head is straight and not rotated and the patient's midline
coincides with the midsagittal light.
14. Release the head support and press it against the patient's forehead. Adjust the head
support height if needed.
15. Close the temple supports against the patients head and close the locking lever to
lock the head support in place.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
™
OP 3D
6 Using the device
61
D519207, 19