Maintaining Dhcp; Clearing Dhcp Statistics; Monitoring Dhcp Operation - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Run the display dhcp server group group-name command to view the configuration of DHCP
server group group1. If the similar information is displayed, the configuration succeeds.
<Quidway> display dhcp server group group1
Group-name

3.6 Maintaining DHCP

After DHCP configurations are complete, you can clear DHCP statistics and monitor DHCP
operation.

3.6.1 Clearing DHCP Statistics

During routine maintenance, you can use the reset commands to clear the statistics about the
specified DHCP server group.
Context
DHCP statistics cannot be restored after they are cleared. Exercise caution when running the
reset commands.
Procedure
l
l
----End

3.6.2 Monitoring DHCP Operation

During routine maintenance, you can use the following commands in any view to monitor DHCP
operation status.
Procedure
l
l
Issue 01 (2012-03-15)
: group1
(0) Server-IP : 100.10.10.1
(1) Server-IP : 100.10.10.2
Gateway : --
VPN instance : --
CAUTION
To clear DHCP server statistics, run the reset dhcp server statistics command in the user
view.
To clear DHCP relay agent statistics, run the reset dhcp relay statistics command in the
user view.
Run the display dhcp relay { all | interface interface-type interface-number } command
to view the DHCP server group on a VLANIF interface and the servers in the DHCP server
group.
Run the display dhcp relay statistics command to view packet statistics on the DHCP
relay agent.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 DHCP Configuration
71