Table of Contents
Advertisement
Callout
Disc Brake Pad
3
Tip: Install the brake pads in their original positions. The brake pad with the wear sensor is mounted
facing the inboard surface of the disc brake rotor.
Disc Brake Pad Shims (Qty: 2)
4
Tip: If installing new brake pads, discard the disc brake pad shims. Install NEW shims.
Brake Caliper Bracket Bolt (Qty: 2)
5
Tightening torque
105 N⋅m (77 lb ft)
6
Brake Caliper Bracket
Rear Brake Rotor Replacement
Callout
WARNING
!
Refer to "Brake Dust Caution: ".
CAUTION
!
Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its
mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this
manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage
to the brake hose and in turn may cause a brake fluid leak.
Preliminary Procedures
1. Raise and support the vehicle. Refer to "Lifting and Jacking the Vehicle: ".
2. Remove the tire and wheel. Refer to "Tire and Wheel Removal and Installation: ".
3. Remove the brake caliper and bracket as an assembly and support with heavy mechanics wire or equivalent.
Refer to "Rear Brake Caliper Bracket Replacement".
Brake Rotor Screw
CAUTION
!
1
Refer to "Fastener Notice: ".
Tightening torque
10 N⋅m (89 lb in)
Component Name
Component Name
Rear Brakes:
4C-21
Advertisement
Table of Contents
Troubleshooting
