Table of Contents
Advertisement
Rear Disc Brake Hardware Replacement
Callout
WARNING
!
Refer to "Brake Dust Caution: ".
CAUTION
!
Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its
mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this
manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage
to the brake hose and in turn may cause a brake fluid leak.
Preliminary Procedures
1. Raise and support the vehicle. Refer to "Lifting and Jacking the Vehicle: ".
2. Remove the tire and wheel. Refer to "Tire and Wheel Removal and Installation: ".
Brake Caliper Guide Pin Bolt (Qty: 2)
CAUTION
!
Refer to "Fastener Notice: ".
NOTE
1
Install an open end wrench to hold the caliper guide pin in line with the brake caliper
while removing or installing the caliper guide pin bolt. DO NOT allow the open end
wrench to come in contact with the brake caliper.
Tip: Hold the brake caliper guide pin stationary when removing the guide pin bolt.
Tightening torque
35 N⋅m (26 lb ft)
Component Name
Rear Brakes:
4C-17
Advertisement
Table of Contents
Troubleshooting
