Creating A Got Screen; Precautions For Device Settings - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
9 GOT Initial Setup

9.1.5 Creating a GOT Screen

Create a screen to display on GOT in the GT Designer3 project data. This manual explains precautions for device setting
and how to set a special function switch.
For details, refer to the "GT Designer3 (GOT2000) Screen Design Manual" (SH(NA)-081220).

9.1.5.1 Precautions for Device Settings

When setting the device which is not GOT device (GS/GD/GB) for the objects such as switch, lamp or numerical display,
the referred CPU (PLC CPU, CNC CPU) needs to be designated.
Set the "CPU No." on the device detail setting screen.
Select "1" for referring the PLC CPU (CPU No.1), or select "2" for referring the CNC CPU (CPU No.2).
After being set, the device will be displayed as follow.
0-FF/(No.) (Device No.)
(Example 1) When referring to PLC CPU D100:
"0-FF/1 D100"
IB-1501452-C
(Example 2) When referring to CNC CPU D100:
"0-FF/2 D100"
126