Machine Parameters And Setting Screen Configuration; Machine Parameter Setting Screen Display Confirmation; Configuration Of Machine Parameter Setting Screen - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
6 Setting Machine Parameters

6.1 Machine Parameters and Setting Screen Configuration

"Machine parameters" means parameters to make functions of CNC, CNC servo, and spindle adapt to the machine to
control.
"Machine parameters" are classified into "Base specification parameters", "Axis specification parameters", "Servo
parameters", "Multi-CPU parameters", "Spindle specification parameters", and "Spindle parameters" according to the
usage and function.
The machine parameter setting screen is displayed when the display confirmation operation is done. When displayed,
data changing is enabled.
When the alarm "Z20 Power ON again" appears, turn the power OFF and ON in order to validate the parameter.

6.1.1 Machine Parameter Setting Screen Display Confirmation

(1) Select [TOOL PARAM]-->[MENU (MENU 5)]-->[SETUP (MENU 4)]-->"Y"-->"INPUT".

6.1.2 Configuration of Machine Parameter Setting Screen

(Note 1) For details of operation, refer to "C70 Instruction Manual (IB-1500267(ENG))".
(Note 2) For how to set [ZERO-RTN PARAM] and [ABS. POSI PARAM], refer to "Setting the Position Detection
System".
100