Part 7: Common Reference Material
2.4.1 Changing QD75M to QD77MS/LD77MS
(1) Start GX Works2 and create a project.
(2) Right-click [Intelligent Function Module] in the Navigation window and select [New Module] to add the
simple motion module QD77MS/LD77MS.
(3) Double-click [Simple Motion Module Setting] of the added simple motion module to start the simple
motion module setting tool.
(4) Read the GX Configurator-QP data.
Click [Project] - [Import GX Configurator-QP Data] from the menu. A dialog box for reading the GX
Configurator-QP data is displayed. Specify and read the QD75MH data.
When using QD75 data made on GX Works2, save the QD75 data as GX Configurator-QP data on GX
Works2 and perform the above operation.
7 - 83