Schlage PIB300 User Manual page 223

Hide thumbs Also See for PIB300:

Table of Contents

When wiring the RS-422 daisy-chain network, do not wire HandPunch

terminals in a "star" network (a network where a number of units are all

connected to the network at one, central location – see Figure 2-5).

Daisy Chain - OK

Figure 2-5: Daisy-Chain Versus Star Network Communication Connections

Ethernet Host

The HandPunch is available with an optional, internal Ethernet

communications module for TCP/IP communications between the HandPunch

network and the host computer. When connecting via an Ethernet connection,

one HandPunch terminal must be configured with this Ethernet option. This

terminal will communicate with the host computer.

To make the Ethernet connection, the Ethernet wiring must conform to

10BaseT standards. An Ethernet RJ-45 jack must be installed on or in the wall

behind the Ethernet HandPunch terminal. Position the jack location using the

template provided in this manual (see "Figure 3-2" on page 25). The cable from

the jack to the HandPunch is not provided with the Ethernet option. A wiring

diagram for the Ethernet to host computer connection is found on page 39.

IP Address and Gateway and Subnet Mask information is entered at the

HandPunch using the Set Serial command (see page 59).

The HandPunch is also available with an optional modem module for

telephone line communications between the HandPunch network and the

host computer. When connecting via modem, one HandPunch terminal must

be configured with the modem option. This terminal will communicate with the

host computer.

To make the modem connection, a telephone jack must be installed on or

in the wall behind the modem HandPunch terminal. Position the RJ-11 jack

location using the template provided in this manual (see "Figure 3-2" on page

25). The short black cable provided with the modem HandPunch connects the

terminal to the telephone jack. A wiring diagram for a modem to host computer

Star - Not Supported

HandPunch 3000/4000 Manual

Show Quick Links

Chapters

Table of Contents