Schlage PIB300 User Manual page 235

Wiring Connections
Once the HandPunch is attached to the wall plate the wiring connections to
the HandPunch can be made (see Figure 4-1).
Figure 4-1: Wiring Connections
The following tables provide the pinouts for the terminal strips on the
Wiring
HandPunch.
Examples
•
•
•
•
The following figures provide the pinout diagrams for the RJ-11 and RS-232
connectors:
•
•
WALL
Power
Connectors
RJ-11
RS-422
Top of HandPunch
"Table 2" on page 32 provides the pinouts for TS-2: Input Connections.
"Table 3" on page 32 provides the pinouts for TS-3: Card Reader and Output
Connections.
"Table 4" on page 33 provides the pinouts for the Serial RS-232 Connection.
"Table 5" on page 33 provides the pinouts for the RS-422 HandPunch to
HandPunch Network Connection.
"Figure 4-2" on page 33 provides the pinouts for J3, the RJ-11/RS-422
Network Configuration.
"Figure 4-3" on page 34 provides the pinouts for J8, the RS-232 Serial Printer
Connection.
J7 Battery
Reset
Jumper
Switch
Terminal
Optional Modem
Strips
or Ethernet
HandPunch 3000/4000 Manual
Wall Plate
Top of
Serial RS-232
Terminal
31