Table of Contents
Advertisement
Motor Minimum
Thermo Scientific
You can limit the stirring speed to a certain point by setting the limit of
maximum stirring speed. The range of speed adjustable is from 1 to
(Mmin)
1000rpm.
Step 1: Press the CONFIG Button.
Step 2: Select the Motor Minimum [Mmin] shown below by turning the
Stirrer Knob.
Step 3: Change the limit to the desired value by turning the Stirrer Knob
and press the Stirrer knob.
Step 4: Save it by using the Stirrer Knob as shown below.
If you don't want to save it, press the Stirrer Knob when display shows
"SAVE NO". [When you don't need to save the changes]
Step 5: Terminate configuration mode as described in Configuration
Mode.
Section 4
Control Panel
Digital Hotplate
4-27
Advertisement
Table of Contents
