Chapter 2 Methods; Minimum Pc Requirements; Installing The E-Gel ™ Imager Gel Documentation System; Install Hardware - Thermo Scientific E‑Gel 4466611 User Manual

2

Minimum PC requirements

Installing the E‑Gel

Install hardware

14
In order to install and operate both the E‑Gel
PC must meet the following minimum requirements:
™ ™
• Intel Core 2 Duo processor, 1.8 GHz.
• Minimum 1 GB RAM of memory (2 GB recommended).
™
• Windows 7 Professional (English version), OR 32-bit or 64-bit Windows
operating systems.
• Minimum monitor resolution of 1024 × 768 pixels.
• A free USB 2.0 port (Not compatible with USB 1.0 or 1.1).
™
imager gel documentation system
The installation procedure for the E‑Gel
completed in four steps as outlined below:
Install hardware
™
E‑Gel Imager Light Base
Install GelCapture Software
™
Windows 7 Professional
Windows ™ 10 Professional
Install GelQuant Express Software
GelQuant Express Software
Install the hardware for the E‑Gel
Base as described in the following section.
™
Imager and GelCapture Software, your
™
Imager Gel Documentation System can be
Install GelCapture from the CD
See GelQuant Express Manual
™
Imager Camera Hood and E‑Gel
‑ Gel
E ™ Imager Gel Documentation System User Guide
Methods
™
10
See page 14
See page 34
™
Imager Light