Table 3-4. Signal Type Group Choices - Thermo Scientific 146i Instruction Manual

Analog Input
Configuration
Thermo Fisher Scientific
Table 3–4. Signal Type Group Choices
Concentrations
None
Gas Conc
O Conc
3
Perm Conc
The Analog Input Configuration menu displays a list of the 8 analog input
channels available for configuration. This screen is only displayed if the I/O
expansion board option is installed. Configuration includes entering
descriptor, units, decimal places, choice of 1-10 points in the table, and
corresponding number of points selected.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Analog Input Config.
ANALOG INPUT CONFIG:
>CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
CHANNEL 7
OPER MODE
Other Measurements
None
Target Gflow
Actual Gflow
Target Zflow
Actual Zflow
Target Tflow
Actual Tflow
Pressure
Bench Temperature
Lamp Temperature
O Lamp Temperature
3
Intensity
Noise
IN1
IN2
IN3
IN4
IN5
IN6
IN7
DIAGS ALARM
Model 146i Instruction Manual
Operation
Instrument Controls Menu
Analog Inputs
None
Analog Input 1
Analog Input 2
Analog Input 3
Analog Input 4
Analog Input 5
Analog Input 6
Analog Input 7
Analog Input 8
3-65