Hub-To-Hub Using Ethernet Routers; Figure 16-5. Hub-To-Hub With Standard Traffic Using Routers - Comtech EF Data CDM-625 Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625:

Table of Contents

CDM-625 Advanced Satellite Modem

Ethernet Network Configuration

Hub-to-Hub using Ethernet Routers

Figure 16-5 shows two hub-sites connected with standard Ethernet traffic, using routers instead

of switches for the Ethernet connection. The routers will block the broadcasts coming from the

remote network; therefore, the creation of a broadcast storm is prevented and there is no

possibility of having a remote MAC on the Hub networks.