Password-Attributes - Dell S4810 Reference Manual

password-attributes

Configure the password attributes (strong password).
S4810
Syntax
password-attributes [min-length number] [max-retry number]
[character-restriction [upper number] [lower number] [numeric
number] [special-char number]]
To return to the default, use the no password-attributes [min-length
number] [max-retry number] [character-restriction [upper
number] [lower number] [numeric number] [special-char number]]
command.
Parameters
min-length
number
max-retry
number
character-
restriction
upper number
lower number
numeric
number
special-char
number
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
1470
(OPTIONAL) Enter the keywords min-length then the
number of characters. The range is from 0 to 32 characters.
(OPTIONAL) Enter the keywords max-retry then the
number of maximum password retries. The range is from 1 to
16.
(OPTIONAL) Enter the keywords character-restriction
to indicate a character restriction for the password.
(OPTIONAL) Enter the keyword upper then the upper
number. The range is from 0 to 31.
(OPTIONAL) Enter the keyword lower then the lower
number. The range is from 0 to 31.
(OPTIONAL) Enter the keyword numeric then the numeric
number. The range is from 0 to 31.
(OPTIONAL) Enter the keywords special-char then the
number of special characters permitted. The range is from 0
to 31.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Security