Table 135: Description Of The Configuration Scripts For "Clock - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6

Table 135: Description of the configuration scripts for "Clock"

Parameter
Clock
Time and Date
Date on Device,
local
Time on Device,
UTC
Time on Device,
local
12-Hour Format
Time zone
TZ String
Manual
Version 1.0.0
Status Call
get_clock_data
read
date-local
config_clock
write type=local
date=<date>
get_clock_data
read
time-utc
config_clock
write
type=utc time=<Time>
get_clock_data
read
time-local
config_clock
write
type=local time=<Time>
get_clock_data
read
display-mode
config_clock _
write
display_mode
display-mode=<value>
get_clock_data
read
tz-string
config_timezone
write
tz-string=<String>
Appendix
Output/Input
Local time and date
Change date. The format
for <date> is:
DD.MM.YYYY
Time/UTC
Change time, based on
UTC time. The format for
<time> is:
hh:mm:ss xx
Time/local time
Change time, based on local
time. The format for
<time> is:
hh:mm:ss xx
Display format of the time
in 12- or 24-hour format:
12-hour format or 24-hour
format
Set the display format of
the time. Entries for
<value> are:
12-hour-format
24-hour-format
Currently set time zone –
original TZ string as stored
in the operating system.
Change TZ string directly.
Example of <string>:
CET-1CEST,
M3.5.0/2,M10.5.0/3
261
Validity
immediate
after restart