Clock" Page; Figure 30: "Clock" Page; Table 18: Description Of The Parameters Of The "Clock" Page - WAGO -I/O-SYSTEM 750 User Manual

9.1.5

"Clock" Page

On this page, configure the real-time clock. To accept your entries, click on the
[CHANGE] button.
Your time zone entries are not active until after a restart/reset of the I/O-IPC (see
Section 8.5).

Figure 30: "Clock" page

The following table explains the parameters listed on the page:

Table 18: Description of the Parameters of the "Clock" Page

Time and Date
Time on device, local
Time on device, UTC
Date on Device
12-Hour-Format
WAGO I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master
Note
Set local time here.
Set GMT time here.
Set the date here.
Switching between 12-hour and 24-hour time display.
Configuration 65