Modbus Services Configuration" Page; Modbus Tcp" Group; Modbus Udp" Group; Table 91: Wbm "Modbus Services Configuration" Page - "Modbus Tcp - WAGO 750-8207 Manual

148 Commissioning
7.8.1.31

"MODBUS Services Configuration" Page

The settings for various MODBUS services are shown on the "MODBUS Services
Configuration" page. The groups are only visible if the e!RUNTIME system is
enabled. Otherwise an information text is displayed.

7.8.1.31.1 "MODBUS TCP" Group

Table 91: WBM "MODBUS Services Configuration" Page – "MODBUS TCP" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change is effective
immediately.

7.8.1.31.2 "MODBUS UDP" Group

Table 92: WBM "MODBUS Configuration Services" Page – "MODBUS UDP" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change is effective
immediately.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Explanation
Disable or enable the MODBUS/TCP service here.
Explanation
Disable/enable the MODBUS-UDP service here.
WAGO-I/O-SYSTEM 750