Fieldbus" Tab; Modbus Services Configuration" Page; Table 109: Wbm "Modbus Services Configuration" Page - "Modbus Tcp" Group; Table 110: Wbm "Modbus Services Configuration" Page - "Modbus Udp" Group - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100
15.1.1.3

"Fieldbus" Tab

15.1.1.3.1 "MODBUS Services Configuration" Page

The "Modbus Services Configuration" page displays the settings for various
Modbus® services. The groups only appear if the e!RUNTIME system is
enabled. Otherwise an information text is displayed.
"Modbus TCP Slave" Group
Table 109: WBM "Modbus Services Configuration" Page – "Modbus TCP" Group
Parameters
Service active
Click the [Submit] button to apply the changes. The change takes effect
immediately.
"Modbus UDP Slave" Group
Table 110: WBM "Modbus Services Configuration" Page – "Modbus UDP" Group
Parameters
Service active
Click the [Submit] button to apply the changes. The change takes effect
immediately.
Explanation
Disable or enable the Modbus/TCP service.
Explanation
Disable/enable the Modbus UDP service.
Version 1.1.0, valid from FW Version 03.08.07(20)
Appendix 177
Manual