Cscl Continuous Change Of Station Class - NEC Univerge SV8500 Operation And Maintenance Manual

CSCL: Continuous Change of Station Class
1. Functional Outline
This command can change the station class information (TEC, RSC, SFC) for a group of stations by specifying
the range of the station number.
2. Parameters
Input Data
TN:
STN(START):
STN(END):
TEC(OLD):
TEC(NEW):
RSC(OLD):
RSC(NEW):
SFC(OLD):
SFC(NEW):
In the bottom part of the display, a check box is provided to determine whether to use "*" and "#" as
Note 1:
a part of the station number. If necessary, check the box.
Details on Telephone Equipment Class (TEC) are shown below:
Note 2:
1=DP (10pps)
3=DP/PB
5-11=Not used
13=Data Terminal via Dterm
15=CAS line
17=Not used
19-22=Not used
24-26=Not used
Tenant Number
First Station Number [0-9, #, * (maximum six digits)]
Last Station Number [0-9, #, * (maximum six digits)]
Telephone Equipment Class before change [1-31]
Telephone Equipment Class after change [1-31]
Route Restriction Class before change [0-15]
Route Restriction Class after change [0-15]
Service Feature Class before change [0-15]
Service Feature Class after change [0-15]
2=PB
4=DP (20pps)
12=Dterm
14=Hot Line
16=Data Terminal via Data Module
18=Virtual Line Appearance (for Dterm Multi-Line)
23=ISDN Terminal
27=8 Conference Equipment
CHAPTER 7
– 767 –
Maintenance Commands
Note 1
Note 1
,
Note 2 Note 3
Note 2
Note 3
Note 3