DTELN: Display of Telephone Number Data for NDM
1. Functional Outline
This command is used to display the registered station data corresponding to a specified User Group Number
(UGN) and Telephone Number (TELN). The following data related to the Number Group can be displayed by
clicking the selection button for each data. This command can be used only when logging in to Network Control
Node (NCN).
•
ACPGN:
•
ACPEN:
•
ASHUN:
•
ASHCN:
•
AHLSN:
•
ASHPN:
•
AKYD:
2. Parameters
Input Data
UGN:
TELN:
Output Data
FPC:
TN:
STN:
LENS:
TEC:
RSC:
SFC:
Call Pickup Group (NDM)
Call Pickup Expand Group (NDM)
Station Hunting Group-UCD (NDM)
Station Hunting Group-Circular (NDM)
Hot Line Station (NDM)
Station Hunting Group-Pilot (NDM)
Key Data for Dterm
User Group Number
Telephone Number
Fusion Point Code (1-253)
Tenant Number
Station Number
Line Equipment Number (six digits)
MG:
Module Group Number
UNIT:
Unit Number
G:
Group Number
LV:
Level Number
Telephone Class (1-31)
Route Restriction Class (0-15)
Service Feature Restriction Class (0-15)
CHAPTER 7
– 829 –
Maintenance Commands