[Cmdb] Calling Number Development Data - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
DB
FUNCTION:
This command is used to assign the calling number development data for CALLER ID.
PRECAUTION:
Clearing all data in memory for calling number development (CMDB Y=90) is necessary before assign-
ing the calling number development data by CMDB and CMDC.
The development data by CMDB and CMDC are assigned toward the first CIR card (PN-4RSTC), which
has been assigned a minimum AP number. When providing multiple CIR cards, save the development
data and load them for the other CIR cards using a MAT. For detail procedure, refer to the Feature Pro-
gramming Manual.
ASSIGNMENT PROCEDURE:
ST + DBYY + DE
DATA TABLE:
Y
No. MEANING
00 Calling party's name
assignment
01 Destination station
number for Day Mode
NOTE 1, NOTE 2
02 Destination station
number for Night
Mode
NOTE 1, NOTE 2
CALLING NUMBER DEVELOPMENT DATA
1ST DATA
+ + DE
(1-4 digits)
1ST DATA
DATA MEANING
0-1499 Calling Number
Development Table
number assigned
by CMDC
2ND DATA
+ + EXE
(1-14 digits)
DATA
X...XXXX
(Maximum 14
characters)
NONE
CCC
X...XXXX
(Maximum 12
digits)
NONE
CCC
X...XXXX
(Maximum 12
digits)
NONE
CCC
– 710 –
: Initial Data
2ND DATA
MEANING
Character Code
See Character Code
Table in CM77.
No data
Clear
Day Mode Destination station num-
ber (X=0-9)
No data
Clear
Night Mode Destination station num-
ber (X=0-9)
No data
Clear
Continued on next page
NWA-008844-001 Rev.5.0
NOVEMBER/15/2006
CMDB
91ch3008.fm