Service Code Setup (For Service Access) - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the
Service Codes which are used for service access. You can customize additional
Service Codes in Programs 11-10, 11-11, and 11-13 through 11-16.
The following chart shows:





Input Data
Item
No.
2 - 112
Program 11 : System Numbering

11-12 : Service Code Setup (for Service Access)

The number of each code (01~59).
The function of the Service Code.
The type of telephones that can use the Service Code.
The default entry. For example, dialing (Item 05) cancels a previously set Camp-On.
Programs that may be affected with the changing the code.
Item
01
Bypass Call
Activating Call Forwarding/Do Not Disturb
Override. This code is available only if you
disable the voice mail Single Digit dialing
code in Program 11-16-09.
02
Conference
03
Override (Off-Hook Signaling)
04
Set Camp-On
05
Cancel Camp-On
06
Switching of Voice Call and Signal Call
07
Step Call
08
Barge-In
09
Change to STG (Department Group) All
Ring
10
Station Speed Dialing
UNIVERGE SV8100
Default Default
Terminals
(OT)
MLT, SLT 807
MLT, SLT 826
MLT, SLT 809
MLT, SLT 850
MLT, SLT 870
MLT, SLT 812
MLT, SLT 808
MLT, SLT 810
MLT, SLT 780
MLT, SLT 813
Program 11 : System Numbering
Related
(AU) Program
707 11-16-09
#1
709
750
770
712
708
710
No 16-02
Setting
#2