Called Number Display - Attendant - NEC NEAX2400 IPX Programming Manual

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

C-59
General Description
If a call is transferred to the ATTENDANT CONSOLE [A-3] as a result of:
DO NOT DISTURB
CALL FORWARDING - ALL CALLS
CALL FORWARDING - BUSY LINE
CALL FORWARDING - DON'T ANSWER
CALL FORWARDING - INTERCEPT/ ANNOUNCEMENT
Information pertaining to the called station is displayed on the Attendant Console.
Operating Procedure
1.
The Attendant answers an incoming call.
a.) The DEST lamp lights.
b.) The Called telephone number is displayed.
2.
The Attendant presses the SRC button.
a.) The DEST lamp goes off, and the SRC lamp lights.
b.) Either the calling party's tenant number is displayed, or RSC number and telephone number are
displayed.
Service Conditions
1.
This service is effective when a station-to-station call or a DID call has been routed to an Attendant
Console as a result of:
DO NOT DISTURB
CALL FORWARDING - ALL CALLS
CALL FORWARDING - BUSY LINE
CALL FORWARDING - DON'T ANSWER
CALL FORWARDING - INTERCEPT/ANNOUNCEMENT
2.
If the Attendant presses the SRC button while the called telephone number is displayed, the display
changes to the number of the calling party. The called telephone number cannot be displayed again.
3.
While the called telephone number is displayed, the Attendant can transfer the call to a desired station by
keying the destination number on the keypad. In this case, the called telephone number of that call cannot
be displayed again.
4.
While the called telephone number is displayed, the Attendant can place the call on hold by pressing the
HOLD key. The called telephone number is displayed again when the Attendant picks up the call again.
5.
While the called telephone number is displayed, the Attendant can set CALL PARK [C-29] service. The
called telephone number cannot be displayed again.
Programming
ASYD - System Data 1, Index 70, Bit 0. Called Number Display when Call Forwarding to ATTCON
0/1: Out/In Service.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1

Called Number Display - Attendant

Called Number Display - Attendant
[D-11]
[C-5]
[C-2]
[C-3]
[C-25]
[D-11]
[C-5]
[C-2]
[C-3]
[C-25] and is answered by the
Attendant.
C-59
Page 219

Advertisement

Table of Contents
loading

Table of Contents