Table 5-5 Dt330 Compatibility Settings; Table 5-6 Terminal And Line Key/Lcd Compatibility (Dt300/Dt700); Table 5-7 Terminal And Line Key/Lcd Compatibility (Dt400/Dt800) - NEC Univerge SV9100 System Hardware Manual

Issue 3.0

Table 5-5 DT330 Compatibility Settings

ADA-L Unit Switch
Settings
ADA Connection for
Recording Only.
ADA Connection for
Sending Recorded Calls
to the Telephone.
To Send and Receive to
the Terminal
Lot Numbers: I, J – Hardware Revision
Lot Numbers: L, M, S – Software Revision
To verify DT-330 terminal firmware, hold down keypad buttons 1, 2 and 3 while plugging the line cord into the

terminal.

Table 5-6 Terminal and Line Key/LCD Compatibility (DT300/DT700)

Terminal and Line Key/LCD Compatibility (DT400/DT800) on page 5-8
compatibility between the terminals and Line Key or LCD used in the system.
Table 5-6 Terminal and Line Key/LCD Compatibility (DT300/DT700)
Terminal
Digital Terminals: DT300
DTL-2E-1 (BK) TEL
DTL-6DE-1 (BK) TEL
DTL-12E-1 (BK) TEL
DTL-8LD(BK)/(WH) TEL
DTL-12BT-1 (BK) TEL
DTL-12D-1 (BK)/(WH) TEL
DTL-12PA-1 (BK) TEL
DTL-24D-1 (BK)/(WH) TEL
SV9100 System Hardware Manual
xxx I Lx or lower
(Version 1.E0 or lower)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7 and
8 are OFF. Switches 1, 4
and 6 are ON.
Not supported
8 LK-L 8LKD(LD)-L
— —
— —
— —

—
 
 
 
 
Terminal Lot Number DT-330
xxx I Mx
(Version 8.10)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7 and
8 are OFF. Switches 1, 4
and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Line Key/LCD
8LKI(LD)-L 12LK-L
— —
— —
— —
— —

—

—

—
— —
xxxJSx or higher
(Version 2.20 or higher)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches 4
and 6 are ON.
Dip switches 2, 3, 5, 7 and
8 are OFF. Switches 1, 4
and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches 4
and 6 are ON.
and Table 5-7
show the
LCD (BL)-L DCL-60
— —
— —
— —

—
 
 
 
 
5-7