Starting The Remote Console; Starting Remote Console Using Management Module Web Console - Hitachi Compute Blade 500 Series Remote Console Users Manual

Starting the remote console

This section describes how to start the remote console.
The remote console can be started by the following two ways:
• Starting remote console using Management module Web console on page
2-2
• Starting remote console using server blade Web console on page 2-6

Starting remote console using Management module Web console

This subsection describes steps to start the remote console from Management
module Web console.
1 Start a new web browser on the system console.
.
2 Enter the URL of management module web console (enter "https://
.
192.168.0.1/" when factory default setting) into the address field box of
the browser.
IP address of management module
URL of Web console
Tip:
•
•
•
3 Login the Web console of the management module.
.
2-2
Hitachi Compute Blade 500 Series Remote Console User's Guide
Table 2-1 Factory default account settings for the system
Item
The above URL indicates the default IP address of management
module, or port number is not entered since using default number. If
you have changed the IP address of management module or the port
number of web console, enter the proper URL for your configuration.
The URL is configured in the following form:
http://< IP address>:< port number> or
https://< IP address>:< port number>
The default port number:
http: 80
https: 443
Using the remote console
administrator
192.168.0.1
https://192.168.0.1
Factory default