Time Settings; Time Settings For Management Module - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Initializing PIN Administration tab > Users and Roles > Action button >
PIN settings
• Disabling validity
The LCD touch console function can be disabled on the system unit. When
it is disabled, you cannot operate the LCD touch console even if
connecting it to the system unit.
The factory default is Enabled. You can change values from CLI console.
Showing LCD touch console setting for validity
Setting LCD touch console validity

Time settings

This section describes time setting methods for management modules.

Time settings for management module

You can set up the date, time, the time zone, and the daylight saving time in
the management module. Set correct settings in the management module
before starting operation.
Displaying/setting time information
Displaying time information
2-8
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-11 Web console operation
Item
Initialize LCD PIN
Table 2-12 LCD touch console operation
Item
Table 2-13 CLI touch console operation
Table 2-14 Web console operation
Item
Table 2-15 CLI console command
Item
Functional detail
Operation
Description
System settings > PIN
Item
Administration tab > Date and time
show time local
show time timezone
Description
show lcd setting
set lcd validity
Operation
Command