Management Module - Hitachi Compute Blade 500 Series Web Console Users Manual

Item
LID
Hot standby
status
Item
LID ON
LID OFF Turns off the LID (Identification LED) of a selected management module. With

Management module

This window shows the operation status of a selected management module,
hardware information. You can perform its operations.
2-132
Boot disable: With a management module installed, but the
management module cannot start due to without required settings
Warning: A warning, with which the management module can
operate, is issued.
Failed: A failure, with which the management module cannot
operate, is issued. The management module has no redundancy.
-----: No management module is installed.
Shows an LID (Identification LED) state among the following states.
ON: Powered on.
OFF: Powered off.
-----: No management module is installed.
Shows the management module is active or standby.
Active: Powered on.
Standby: Powered off.
-----: No management module is installed.
Table 2-148 Action buttons at the bottom
Turns on the LID (Identification LED) of a selected management module. With
no management module selected, the button is not available.
no management module selected, the button is not available.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description