Inserting The Communication Manager Cd-Rom Into The Media Server; Rebooting The Standby Media Server; Verifying Reboot Progress - Avaya S8100 Series Manual

Upgrading Communication Manager on Avaya S8700 Media Server from R1.x to R3.1
Inserting the Communication Manager CD-ROM into the media
server
Insert the CD-ROM that contains Communication Manager into the CD-ROM drive on the media
server. Close the tray.
Note:
You can copy Communication Manager software from an http or tftp server onto
Note:
the media server. In this case, skip this step.

Rebooting the standby media server

!
Important:
When you shut down the media server, you lose access to the Maintenance Web
Important:
Interface.
The following steps reboots the media server.
1. On the Web Interface under Server, click Shutdown Server.
2. Select Immediate Shutdown now and Restart server after shutdown.
3. Click Shutdown Server.

Verifying reboot progress

To check the reboot process.
1. Click Start > Run to open the Run dialog box.
2. Type command and press Enter to open an MS-DOS window.
3. Type arp -d 192.11.13.6 and press Enter to clear the ARP cache in the laptop. This
command responds with one of the following responses:
The command line prompt when the cache is cleared.
●
The following message is when the specified IP address does not currently contain an
●
entry in the ARP cache:
The specified entry was not found.
182 Upgrading, Migrating, and Converting Media Servers and Gateways