Sector Erase Resumption - Fujitsu MB90335 Series Hardware Manual

MB90335 Series
22.7.6

Sector Erase Resumption

This section explains the procedure for inputting the sector erase resume command to
resume erasing of the suspended flash memory sector.
■ Erase Resumption
• Suspended sector erasing can be resumed by transmitting the sector erase resume command in the
command sequence table from CPU to flash memory.
• The sector erase resume command resumes sector erasing suspended by the sector erase suspend
command. This command is executed by writing the erase resume code (30
in the specified sector for erase area is specified.
• Inputting the sector erase resume command during sector erasing is ignored.
CM44-10137-6E FUJITSU MICROELECTRONICS LIMITED
CHAPTER 22 DUAL OPERATION FLASH MEMORY
22.7 Details of Programming/Erasing Flash Memory
). In this case, even address
H
509