Juniper ACX1000 Configuration Manual page 1149

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
[edit services]
service-set service-set-name {
interface-service {
service-interface interface-name;
}
next-hop-service {
inside-service-interface interface-name.unit-number;
outside-service-interface interface-name.unit-number;
}
ipsec-vpn-options {
local-gateway (address | interface);
no-anti-replay;
}
ipsec-vpn-rules rule-name;
}
Network Address Translation Overview on page 999
Network Address Port Translation Overview on page 1001
IPsec for ACX Series Overview on page 1087
Enabling Inline Services Interface on ACX Series on page 1008
Service Filters in ACX Series on page 1035
Guidelines for Applying Service Filters on page 1036
Service Filter Match Conditions for IPv4 Traffic on page 1038
Service Filter Actions on page 1039
Network Address Translation Address Overload in ACX Series on page 1001
CoS for NAT Services on ACX Series Universal Access Routers on page 887
Network Address Translation Constraints on ACX on page 1003
Configuring Address Pools for Network Address Port Translation (NAPT) Overview on
page 1007
Network Address Translation Rules Overview on page 1004
Configuring Service Sets for Network Address Translation on page 1030
Configuring Service Sets to Be Applied to Services Interfaces on page 1031
Configuring Queuing and Scheduling on Inline Services Interface on page 1040
Chapter 33: Configuring IPsec
1091