Juniper ACX1000 Configuration Manual page 1031

Table 60: Standard MIBs supported by Junos OS (continued)
Standard MIB
RFC 2580, Conformance Statements for
SMIv2
RFC 2662, Definitions of Managed Objects
for ADSL Lines
RFC 2665, Definitions of Managed
Objects for the Ethernet-like Interface
Types
NOTE: The list of managed objects
specified in RFC 2665 has been updated
by RFC 3635 by including information
useful for the management of 10-Gigabit
per second Ethernet interfaces.
RFC 2787, Definitions of Managed Objects
for the Virtual Router Redundancy
Protocol
RFC 2790, Host Resources MIB
Copyright © 2017, Juniper Networks, Inc.
Exceptions
No exceptions
No exceptions
For M Series, T Series, and MX Series, the
SNMP counters do not count the
Ethernet header and frame check
sequence (FCS). Therefore, the Ethernet
header bytes and the FCS bytes are not
included in the following four tables:
ifInOctets
ifOutOctets
i
fHCInOctets
ifHCOutOctets
However, the EX switches adhere to RFC
2665.
Unsupported table and objects:
vrrpStatsPacketLengthErrors
NOTE: Junos OS does not support this
standard for row creation and the
operation.
Supported tables and objects:
hrStorageTable
NOTE: The file systems ,
/ /config
and always return the same
/tmp
index number. When SNMP restarts,
the index numbers for the remaining
file systems might change.
group
hrSystem
group
hrSWInstalled
hrProcessorTable
Chapter 29: Understanding Network Management
Platforms
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
M Series, MX Series, SRX Series, and T
Series
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
Set
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
, ,
/var
973