Management - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

management

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1594
management (class | static | high-power);
[edit poe],
[edit poe (all | fpc slot-number)]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX2000 Universal Access Routers.
Statement introduced in Junos OS Release 17.2R1 for a Junos Fusion Provider Edge.
Designate how the PoE controller allocates power to the PoE interfaces.
class
—The amount of power allocated to the interface is determined by the class of
class
the connected powered device. If no powered device is connected, standard 15.4 W
power is allocated to the interface. See Understanding PoE on EX Series Switches for
more information about classes of powered devices.
static —The amount of power allocated to the interface is determined by the value of
the statement, not the class of the connected powered device. This
maximum-power
amount is allocated even when a powered device is not connected to the interface,
ensuring that power is available when needed.
high-power —(ACX2000 routers only) ACX2000 PoE interfaces support power delivery
of up to 65 W per port using all four pairs of Ethernet RJ45 cables. Traditional PoE
ports use only two pairs of Ethernet cable for power delivery. According to the IEEE
802.3af standard, each port can deliver a maximum power of up to 32 W. With
mode of power delivery over all four pairs, the power sourcing equipment
high-power
(PSE) has an option to deliver up to 65 W per port, provided the powered devices
request this high power over all four pairs of the Ethernet cable. By default,
mode is not enabled and has to be explicitly enabled. When the PoE controller is
configured for
high-power
powered devices that request power over two pairs.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring PoE on EX Series Switches (CLI Procedure)
Configuring Power over Ethernet on a Junos Fusion Enterprise
Understanding PoE on EX Series Switches
mode, the PoE controller does not deliver power to normal
high-power
Copyright © 2017, Juniper Networks, Inc.