Juniper ACX1000 Configuration Manual page 1218

ACX Series Universal Access Router Configuration Guide
Table 82: Features Using TCAM Resource (continued)
TCAM Apps/TCAM Users
fw-inet-pm
fw-l2-in
fw-mpls-in
fw-semantics
fw-vpls-in
ifd-src-mac-fil
ifl-statistics-in
ifl-statistics-out
ing-out-iff
ip-mac-val
ip-mac-val-bcast
ipsec-reverse-fil
irb-cos-rw
lfm-802.3ah-in
lfm-802.3ah-out
lo0-inet-fil
lo0-inet6-fil
mac-drop-cnt
mrouter-port-in
1160
Feature/Functionality
Inet family firewall with port-mirror action
NOTE: This feature is not supported on ACX5048 and ACX5096
routers.
Bridge family ingress firewall on Layer 2 interface
MPLS family ingress firewall
Firewall sharing semantics for CLI configured firewall
VPLS family ingress firewall on VPLS interface
Physical interface level source MAC filter
Logical level interface statistics at ingress
Logical level interface statistics at egress
Ingress application on behalf of egress family filter for log and syslog
IP MAC validation
IP MAC validation for broadcast
Reverse filters for IPsec service
NOTE: This feature is not supported on ACX5048 and ACX5096
routers.
IRB CoS rewrite
Link fault management (IEEE 802.3ah) at ingress
NOTE: This feature is not supported on ACX5048 and ACX5096
routers.
Link fault management (IEEE 802.3ah) at egress
Looback interface inet filter
Looback interface inet6 filter
Statistics for drops by MAC validate and source MAC filters
Multicast router port for snooping
TCAM Stage
Ingress
Ingress
Ingress
Pre-ingress
Ingress
Pre-ingress
Ingress
Egress
Ingress
Pre-ingress
Pre-ingress
Ingress
Egress
Ingress
Egress
Ingress
Ingress
Ingress
Ingress
Copyright © 2017, Juniper Networks, Inc.