Juniper ACX1000 Configuration Manual page 1353

Results
Router PE1
Copyright © 2017, Juniper Networks, Inc.
user@PE2> show route table l2circuit.0
l2circuit.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.0.2.3:NoCtrlWord:5:200:Local/96
192.0.2.3:NoCtrlWord:5:200:Remote/96
192.0.2.4:NoCtrlWord:5:200:Local/96
192.0.2.4:NoCtrlWord:5:200:Remote/96
user@PE3> show route table H-VPLS.l2vpn.0
H-VPLS.l2vpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.0.2.3:33:3:1/96
192.0.2.4:44:4:1/96
user@PE4> show route table H-VPLS.l2vpn.0
H-VPLS.l2vpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.0.2.3:33:3:1/96
192.0.2.4:44:4:1/96
The configuration and verification parts of this example have been completed. The
following section is for your reference.
The relevant sample configuration for Router PE1 follows.
interfaces {
ge-2/0/5 {
encapsulation ethernet-ccc;
unit 0 {
description to_CE1;
family ccc;
}
}
ge-2/0/8 {
unit 0 {
Chapter 35: Configuring Virtual Private LAN Service
*[L2CKT/7] 00:13:13, metric2 1
> to 10.10.4.1 via ge-2/0/8.0
*[LDP/9] 00:13:13
Discard
*[L2CKT/7] 00:13:13, metric2 1
> to 10.10.5.2 via ge-2/0/9.0
*[LDP/9] 00:13:13
Discard
*[L2VPN/170/-101] 03:19:26, metric2 1
Indirect
*[BGP/170] 03:15:45, localpref 100, from 192.0.2.4
AS path: I, validation-state: unverified
> to 10.10.6.2 via ge-2/0/9.0
*[BGP/170] 03:21:17, localpref 100, from 192.0.2.3
AS path: I, validation-state: unverified
> to 10.10.6.1 via ge-2/0/9.0
*[L2VPN/170/-101] 03:17:47, metric2 1
Indirect
1295