L3Vpn - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

l3vpn

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1584
l3vpn {
extended-space;
}
[edit logical-systems logical-system-name routing-options forwarding-table
chained-composite-next-hop ingress],
[edit routing-options forwarding-table chained-composite-next-hop ingress]
Statement introduced in Junos OS Release 12.1.
Statement introduced in Junos OS Release 12.3X52 for ACX Series routers.
Statement introduced in Junos OS Release 11.3 for QFX Series switches.
(M120 routers, M320 routers with Enhanced III FPCs, MX Series routers, and T Series
routers only) Accept larger numbers of Layer 3 VPN BGP updates with unique inner VPN
labels (up to one million). The neighboring PE routers are typically from other vendors
and are configured to assign a unique inner label to each Layer 3 VPN BGP route.
NOTE:
On MX Series routers, this statement is not supported when the router has
both DPCs and MPCs installed. You must remove one or the other type of
card to successfully use this statement.
In Junos OS Release 11.4 and earlier, the
l3vpn-composite-nexthop
logical-systems logical-system-name routing-options]
routing-options]
On ACX Series routers, the
NOTE: The
[edit logical-systems]
Series routers.
The remaining statement is explained separately.
This statement is disabled by default.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Accepting Route Updates with Unique Inner VPN Labels in Layer 3 VPNs on page 785
l3vpn
, and the statement was available at the
hierarchy levels.
extended-space
hierarchy level is not applicable in ACX
Copyright © 2017, Juniper Networks, Inc.
statement was titled as
[edit
and
[edit
statement is not supported.