Grant-Duration - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Required Privilege
Level
Related
Documentation

grant-duration

Syntax
Hierarchy Level
Description
Options
Required Privilege
Level
Related
Documentation
1544
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling Graceful Restart
Configuring Routing Protocols Graceful Restart
Configuring Graceful Restart for MPLS-Related Protocols
Configuring VPN Graceful Restart
Configuring Logical System Graceful Restart
Configuring Graceful Restart for QFabric Systems
grant-duration interval
[edit protocols ptp slave]
Specify the grant duration value. When unicast-negotiation is enabled, the local PTP
slave requests announce, synchronization, and delay-response messages from the master.
In each request, the slave asks for the packets to be sent at a specified rate and the slave
provides a duration for which the rate is valid. The grant-duration value is specified in
seconds. The default grant duration is 3600 seconds or 1 hour.
interval —The grant interval value for the announce messages.
Range: 60 through 7200 seconds
Default: 300 seconds
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
External Clock Synchronization Overview for ACX Series Routers on page 226
Configuring External Clock Synchronization for ACX Series Routers on page 228
Synchronous Ethernet Overview
Copyright © 2017, Juniper Networks, Inc.