Configuring Vrrp For Ipv6 - Juniper ACX1000 Configuration Manual

Related
Documentation

Configuring VRRP for IPv6

On Router A
On Router B
Copyright © 2017, Juniper Networks, Inc.
Understanding VRRP on ACX Series Routers on page 651
Configuring Basic VRRP Support on page 653
Configuring the Advertisement Interval for the VRRP Master Router on page 655
Configuring a Backup Router to Preempt the Master Router on page 656
Modifying the Preemption Hold-Time Value on page 657
Configuring Asymmetric Hold Time for VRRP Routers on page 657
Configuring an Interface to Accept Packets Destined for the Virtual IP Address on
page 658
Configuring VRRP for IPv6 on page 667
Configure VRRP properties for IPv6 in one master (Router A) and one backup (Router B).
[edit interfaces]
ge-1/0/0 {
unit 0 {
family inet6 {
address fe80::5:0:0:6/64;
address fec0::5:0:0:6/64 {
vrrp-inet6-group 3; # VRRP inet6 group number
virtual-inet6-address fec0::5:0:0:7;
virtual-link-local-address fe80::5:0:0:7;
priority 200;
preempt;
}
}
}
}
[edit protocols]
router-advertisement {
interface ge-1/0/0.0 {
prefix fec0::/64;
max-advertisement-interval 4;
}
}
[edit interfaces]
ge-1/0/0 {
unit 0 {
family inet6 {
address fe80::5:0:0:8/64;
address fec0::5:0:0:8/64 {
vrrp-inet6-group 3; # VRRP inet6 group number
virtual-inet6-address fec0::5:0:0:7;
virtual-link-local-address fe80::5:0:0:7;
priority 100;
preempt;
Chapter 21: Configuring Virtual Router Redundancy Protocol (VRRP)
667