Juniper ACX1000 Configuration Manual page 1273

Table 98: jnxSoamDmHistoryStatsTable (continued)
Object
jnxSoamDmHistoryStatsIfdvBackwardMax
jnxSoamDmHistoryStatsIfdvBackwardAvg
jnxSoamDmHistoryStatsIfdvTwoWayMin
jnxSoamDmHistoryStatsIfdvTwoWayMax
jnxSoamDmHistoryStatsIfdvTwoWayAvg
jnxSoamDmHistoryStatsSoamPdusSent
jnxSoamDmHistoryStatsSoamPdusReceived
Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)
Object ID
jnxSoamDmHistoryStatsEntry 18
jnxSoamDmHistoryStatsEntry 19
jnxSoamDmHistoryStatsEntry 20
jnxSoamDmHistoryStatsEntry 21
jnxSoamDmHistoryStatsEntry 22
jnxSoamDmHistoryStatsEntry 23
jnxSoamDmHistoryStatsEntry 24
Description
Contains the maximum one-way
inter-frame delay interval in the backward
direction calculated by this MEP for this
Measurement Interval. The value of this
object is undefined when
jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
Contains the average one-way
inter-frame delay interval in the backward
direction calculated by this MEP for this
Measurement Interval. The value of this
object is undefined when
jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
Contains the minimum two-way
inter-frame delay interval calculated by
this MEP for this Measurement Interval.
The value of this object is undefined when
jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
Contains the maximum two-way
inter-frame delay interval calculated by
this MEP for this Measurement Interval.
The value of this object is undefined when
jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
Contains the average two-way
inter-frame delay interval calculated by
this MEP for this Measurement Interval.
The value of this object is undefined when
jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
Contains the count of the number of
SOAM PDUs sent during this
Measurement Interval. This object applies
when jnxSoamDmCfgType is dmDmm or
dm1DmTx and is undefined if
jnxSoamDmCfgType is dm1DmRx. It
indicates the number of DMM or 1DM
SOAM frames transmitted.
Contains the count of the number of
SOAM PDUs received in this
Measurement Interval. This object
indicates the number of DMR and 1DM
SOAM frames received. This object
applies when jnxSoamDmCfgType is
dmDmm or dm1DmRx and is undefined
if jnxSoamDmCfgTypeis dm1DmTx.
1215