Force Switch - Juniper ACX1000 Configuration Manual

force switch

Syntax
Hierarchy Level
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
request protection-group ethernet-ring force-switch group-name <name> interface-name
<name>
[edit protocols protection-group ethernet-ring]
issue command on an interface of an Ethernet ring protection group. When
force-switch
group-name is specified, this command is issued only on the control channel of that ring
instance (specified by interface name). When group name is not specified and only
interface name is given, this command is issued on all the ring instances configured on
that interface. When only logical interface name is given, this command is issued only
for the ring instance for which the logical interface is configured as the control channel
interface.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Ethernet Automatic Protection Switching Overview
Chapter 41: Configuration Statements
1527