Juniper ACX1000 Configuration Manual page 799

Copyright © 2017, Juniper Networks, Inc.
[edit routing-options]
user@PCC# set autonomous-system 100
Enable RSVP on all interfaces of Router PCC, excluding the management interface.
3.
[edit protocols]
user@PCC# set rsvp interface all
user@PCC# set rsvp interface fxp0.0 disable
Enable MPLS on all the interfaces of Router PCC, excluding the management
4.
interface.
[edit protocols]
user@PCC# set mpls interface all
user@PCC# set mpls interface fxp0.0 disable
Configure a dynamic LSP and disable automatic path computation for the LSP.
5.
[edit protocols]
user@PCC# set mpls label-switched-path lsp_template_no_cspf template
user@PCC# set mpls label-switched-path lsp_template_no_cspf no-cspf
Configure point-to-multipoint LSPs and define external path computing entity for
6.
the LSP.
[edit protocols]
user@PCC# set mpls label-switched-path lsp1-pcc to 128.102.177.16
user@PCC# set mpls label-switched-path lsp2-pcc to 128.102.177.16
user@PCC# set mpls label-switched-path lsp2-pcc lsp-external-controller pccd
Enable external path computing for the MPLS LSPs and assign a template for
7.
externally provisioned LSPs.
[edit protocols]
user@PCC# set mpls lsp-external-controller pccd pce-controlled-lsp
pcc_delegated_no_cspf_* label-switched-path-template lsp_template_no_cspf
user@PCC# set mpls lsp-external-controller pccd pce-controlled-lsp
pce_initiated_no_ero_no_cspf_* label-switched-path-template
lsp_template_no_cspf
user@PCC# set mpls lsp-external-controller pccd pce-controlled-lsp
pce_initiated_loose_ero_no_cspf_* label-switched-path-template
lsp_template_no_cspf
Configure the LSPs that have local control and are overridden by the PCE-provided
8.
LSP parameters.
[edit protocols]
user@PCC# set mpls path loose-path 1.2.3.2 loose
user@PCC# set mpls path strict-path 1.2.3.2 strict
user@PCC# set mpls path strict-path 2.3.3.2 strict
user@PCC# set mpls path path-B
user@PCC# set mpls path path-C
Chapter 23: Configuring Path Computation Element Protocol (PCEP)
741