Juniper ACX1000 Configuration Manual page 1608

ACX Series Universal Access Router Configuration Guide
Description
Required Privilege
Level
Related
Documentation
1550
Select which packet header data to use for per-flow load balancing.
The options are explained separately.
NOTE: To modify the default hashing mechanism on Modular Port
Concentrators (MPCs) and Type 5 FPCs, you need to configure the statements
at the
[edit forwarding-options enhanced-hash-key]
at the [edit forwarding-options hash-key]
and Type 5 FPCs.
NOTE:
The following statements are not supported on T Series routers:
The
symmetric-hash
forwarding-options hash-key family inet]
at the
[edit forwarding-options hash-key family multiservice]
The and
label-1
forwarding-options hash-key family multiservice]
NOTE: The following statements are not supported on Q Series switches:
The
symmetric-hash
forwarding-options hash-key family inet]
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Per-Packet Load Balancing on page 790
Configuring Load Balancing Based on MPLS Labels
Configuring Load Balancing Based on MAC Addresses on page 798
hierarchy level do not support MPCs
and the statements at the
session-id
hierarchy level and all statements
statements, and the IP configuration at the
label-2
and the statements at the
session-id
hierarchy level.
hierarchy level. Statements
[edit
hierarchy level.
[edit
hierarchy level.
[edit
Copyright © 2017, Juniper Networks, Inc.