Juniper ACX1000 Configuration Manual page 974

ACX Series Universal Access Router Configuration Guide
Overview
Configuration
CLI Quick
Configuration
916
In this example, the ATM IMA pseudowire logical interfaces (
configured with three input ATM policers—
policers are configured with the following parameters:
logical-interface-policer —The logical interface policer is configured explicitly on each
logical interface (unit).
—The ATM service category used to define the bit rate at which traffic is
atm-service
policed.
peak-rate —The peak rate is the top rate at which traffic can burst. This is a mandatory
statement that must be included for the configuration to work correctly.
—The sustained rate is the normal traffic rate averaged over time.
sustained-rate
maximum-burst-size —The maximum burst size is the maximum number of cells that
a burst of traffic can contain.
—The Cell Delay Variation Tolerance is a mandatory statement that must be
cdvt
included for the configuration to work correctly.
policing-action —The specified policing action used when the traffic exceeds the limits
set for the policer.
The following steps require you to navigate various levels in the configuration hierarchy.
For information about navigating the CLI, see Using the CLI Editor in Configuration Mode
in the CLI User Guide.
To configure policing on an ATM IMA pseudowire, perform these tasks:
Configuring an ATM Policer on page 917
Applying the ATM Policer on the ATM IMA Logical Interface on page 918
Results on page 918
To quickly configure this example, copy the following commands, paste them in a text
file, remove any line breaks, change any details necessary to match your network
configuration, and then copy and paste the commands into the CLI at the [
level:
set firewall atm-policer policer-1 logical-interface-policer
set firewall atm-policer policer-1 atm-service rtvbr
set firewall atm-policer policer-1 peak-rate 2k
set firewall atm-policer policer-1 sustained-rate 1800
set firewall atm-policer policer-1 max-burst-size 400
set firewall atm-policer policer-1 cdvt 900001
set firewall atm-policer policer-1 policing-action discard-tag
set firewall atm-policer policer-2 logical-interface-policer
set firewall atm-policer policer-2 atm-service nrtvbr
set firewall atm-policer policer-2 peak-rate 1800
set firewall atm-policer policer-2 sustained-rate 1500
unit 0 , unit 1
, , and
policer-1 policer-2 policer-3
Copyright © 2017, Juniper Networks, Inc.
and unit 2 ) are
. The ATM
] hierarchy
edit