Delegation-Priority - Juniper ACX1000 Configuration Manual

delegation-priority

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
delegation-priority priority-number;
[edit protocols pcep pce pce-id]
Statement introduced in Junos OS Release 12.3.
Support for PTX Series added in Junos OS Release 14.2.
Support for QFX10000 switches added in Junos OS Release 16.1R3.
Support for ACX Series added in Junos OS Release 17.1R1.
Specify the priority number of the active stateful Path Computation Element (PCE). This
value is used by the Path Computation Client (PCC) to elect a PCE to delegate LSPs. No
two PCEs can have the same delegation-priority value. The PCC elects the PCE with a
lower priority as the main active stateful PCE to delegate LSPs.
—Priority number of the active stateful PCE.
priority-number
Range: 1 through 65535
Default: 0 (no priority is set)
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
pce on page 1655
Chapter 41: Configuration Statements
1477