Independent-Domain - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

independent-domain

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1560
independent-domain <no-attrset>;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options autonomous-system autonomous-system],
[edit routing-instances routing-instance-name routing-options autonomous-system
autonomous-system]
Statement introduced before Junos OS Release 7.4.
no-attrset option introduced in Junos OS Release 10.4.
Configure an independent AS domain.
The independent domain uses transitive path attribute 128 (attribute set) messages to
tunnel the independent domain's BGP attributes through the internal BGP (IBGP) core.
This improves the transparency of Layer 3 VPN services for customer networks by
preventing the IBGP routes that originate within an autonomous system (AS) in the
customer network from being sent to a service provider's AS. Similarly, IBGP routes that
originate within an AS in the service provider's network are prevented from being sent to
a customer AS.
NOTE: In Junos OS Release 10.3 and later, if BGP receives attribute 128 and
you have not configured an independent domain in any routing instance, BGP
treats the received attribute 128 as an unknown attribute.
NOTE: The
[edit logical-systems]
Series routers.
no-attrset —(Optional) Disables attribute set messages on the independent AS domain.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Tunneling Layer 3 VPN IPv6 Islands over an IPv4 Core Using IBGP and
Independent Domains
Configuring Layer 3 VPNs to Carry IBGP Traffic on page 849
autonomous-system on page 1444
hierarchy level is not applicable in ACX
Copyright © 2017, Juniper Networks, Inc.