Aggregated-Devices - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Required Privilege
Level
Related
Documentation

aggregated-devices

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1424
NOTE: You can configure hybrid mode for two-rate three-color policers
only.
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Hierarchical Policers on ACX Series Routers Overview on page 920
Guidelines for Configuring Hierarchical Policers on ACX Routers on page 921
Hierarchical Policer Modes on page 923
Processing of Hierarchical Policers on page 928
Actions Performed for Hierarchical Policers on page 929
Configuring Aggregate Parent and Child Policers on ACX Series Routers on page 931
aggregated-devices {
ima {
device-count number;
}
}
[edit chassis fpc slot-number pic slot-number]
Statement introduced in Junos OS Release 12.2 for ACX Series routers.
Configure the number of aggregated Inverse Multiplexing ATM (IMA) group interfaces
created on channelized CT1 or CE1 interfaces. The IMA group interface name format is
with the port number taken from the last port on the MIC plus 1. For
at-fpc/pic/port
example, on the ACX2000 router with a 16-port built-in T1/E1 TDM MIC, the IMA group
interface numbering starts with
On the ACX1000 router with an 8-port built-in TDM MIC, the IMA group interface
numbering starts with at-0/0/8
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
ATM IMA Configuration Overview
Configuring ATM IMA
and increments by 1 to
at-0/0/16
and increments by 1 to at-0/0/9
Copyright © 2017, Juniper Networks, Inc.
, and so on.
at-0/0/17
, and so on