Juniper ACX1000 Configuration Manual page 1352

ACX Series Universal Access Router Configuration Guide
1294
00:21:59:0f:35:32
00:21:59:0f:35:33
00:21:59:0f:35:d4
00:21:59:0f:35:d5
user@PE4> show vpls mac-table
MAC flags (S -static MAC, D -dynamic MAC, L -locally learned, C -Control MAC
SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC)
Logical system : PE4
Routing instance : H-VPLS
Bridging domain : __H-VPLS__, VLAN : NA
MAC
address
00:21:59:0f:35:32
00:21:59:0f:35:33
00:21:59:0f:35:d4
00:21:59:0f:35:d5
Make sure that the CE devices can ping each other.
6.
user@CE1> ping 10.255.14.219 # ping sent from CE1 CE4
PING 10.255.14.219 (10.255.14.219): 56 data bytes
64 bytes from 10.255.14.219: icmp_seq=0 ttl=64 time=10.617 ms
64 bytes from 10.255.14.219: icmp_seq=1 ttl=64 time=9.224 ms
^C
--- 10.255.14.219 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 9.224/9.921/10.617/0.697 ms
user@CE2> ping 10.255.14.218 # ping sent from CE2 to CE3
PING 10.255.14.218 (10.255.14.218): 56 data bytes
64 bytes from 10.255.14.218: icmp_seq=0 ttl=64 time=1.151 ms
64 bytes from 10.255.14.218: icmp_seq=1 ttl=64 time=0.674 ms
^C
--- 10.255.14.218 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.674/0.913/1.151/0.238 ms
Check the relevant routing tables.
7.
user@PE1> show route table l2circuit.0
l2circuit.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.0.2.3:NoCtrlWord:5:100:Local/96
192.0.2.3:NoCtrlWord:5:100:Remote/96
192.0.2.4:NoCtrlWord:5:100:Local/96
192.0.2.4:NoCtrlWord:5:100:Remote/96
D vt-2/0/8.135266560
D ge-2/1/3.0
D vt-2/0/9.135266561
D vt-2/0/10.135266562
MAC Logical
flags interface
D vt-2/0/8.17826050
D vt-2/0/9.17826050
D vt-2/0/10.17826050
D ge-2/1/7.0
*[L2CKT/7] 00:12:16, metric2 1
> to 10.10.1.2 via ge-2/0/10.0
*[LDP/9] 00:12:16
Discard
*[L2CKT/7] 00:12:10, metric2 1
> to 10.10.9.2 via ge-2/0/8.0
*[LDP/9] 00:12:15
Discard
NH RTR
Index ID
Copyright © 2017, Juniper Networks, Inc.