Policer Application To Traffic; Configuring Policing On An Atm Ima Pseudowire - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

Policer Application to Traffic

Related
Documentation

Configuring Policing on an ATM IMA Pseudowire

912
Based on CoS configurations, packets of a given forwarding class are transmitted through
a specific output queue, and each output queue is associated with a transmission service
level defined in a scheduler.
Based on other CoS configurations, when packets in an output queue encounter
congestion, packets with higher loss-priority values are more likely to be dropped by the
random early detection (RED) algorithm. Packet loss priority values affect the scheduling
of a packet without affecting the packet's relative ordering within the traffic flow.
After you have defined and named a policer, it is stored as a template. You can later use
the same policer name to provide the same policer configuration each time you want to
use it. This eliminates the need to define the same policer values more than once.
You can apply a policer to a traffic flow in either of two ways:
You can configure a standard stateless firewall filter that specifies the
nonterminating action or the
policer policer-name
two-rate) policer-name nonterminating action. When you apply the standard filter to
the input or output at a logical interface, the policer is applied to all packets of the
filter-specific protocol family that match the conditions specified in the filter
configuration.
With this method of applying a policer, you can define specific classes of traffic on an
interface and apply traffic rate-limiting to each class.
You can apply a policer directly to an interface so that traffic rate-limiting applies to
all traffic on that interface, regardless of protocol family or any match conditions.
You can configure policers at the queue, logical interface, or Layer 2 (MAC) level. Only a
single policer is applied to a packet at the egress queue, and the search for policers occurs
in this order:
Queue level
Logical interface level
Layer 2 (MAC) level
Stateless Firewall Filter Overview.
Traffic Policer Types
Order of Policer and Firewall Filter Operations
Packet Flow Through the Junos OS CoS Process Overview
On ACX Series routers, the ATM policer is attached to the ingress path of the ATM IMA
interface, making it an input policer configured at the [
input policer is then applied to an ATM IMA logical interface. The ATM IMA logical interface
three-color-policer (single-rate |
edit firewall ] hierarchy level. This
Copyright © 2017, Juniper Networks, Inc.