Inet-Precedence (Classifier On Physical Interface); Inet-Precedence (Rewrite Rules On Physical Interface) - Juniper ACX1000 Configuration Manual

inet-precedence (Classifier on Physical Interface)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level

inet-precedence (Rewrite Rules on Physical Interface)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Copyright © 2017, Juniper Networks, Inc.
inet-precedence (classifier-name | default);
[edit class-of-service interfaces interface-name classifiers]
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
On ACX Series Universal Access routers and EX Series switches, map the inet-precedence
field of the incoming packet to the forwarding class and packet loss priority, based on
the specified inet-precedence classifier. When no classifier is configured on the physical
interface, the default ipprec-compatibility inet-precedence classifier is applied on the
physical interface.
classifier-name—Name of the previously defined inet-precedence behavior aggregate
classifier.
default—Default inet-precedence behavior aggregate classifier.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
inet-precedence (rewrite-name | default);
[edit class-of-service interfaces interface-name rewrite-rules]
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
Apply a IPv4 precedence rewrite rule.
rewrite-name —Name of a
rewrite-rules inet-precedence]
—The default mapping. By default, IP precedence rewrite rules alter the first three
default
bits on the type of service (ToS) byte while leaving the last three bits unchanged.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
rewrite-rules mapping configured at the
hierarchy level.
Chapter 41: Configuration Statements
[edit class-of-service
1563