Juniper ACX1000 Configuration Manual page 1224

ACX Series Universal Access Router Configuration Guide
1166
-----------------------------------------------------------------
fw-l2-in
fw-semantics
Group: 14, Mode: SINGLE, Hw grps used: 1, Tcam apps: 1
Used Allocated
Tcam-Entries 200
Counters 200
Policers 100
App tcam usage:
----------------
App-Name Entries Counters Policers Precedence
Related-App-Name ..
-----------------------------------------------------------------
fw-ifl-in
Tcam Resource Stage: Egress
---------------------------
Free [hw-grps: 3 out of 3]
No dynamic tcam usage
To view TCAM resource usage errors for all stages (egress, ingress, and pre-ingress),
use the
show pfe tcam errors all-tcam-stages
user@host> show pfe tcam errors all-tcam-stages detail
Slot 0
Tcam Resource Stage: Pre-Ingress
--------------------------------
No tcam usage
Tcam Resource Stage: Ingress
----------------------------
Group: 11, Mode: SINGLE, Hw grps used: 3, Tcam apps: 2
Errors
Tcam-Entries 0
Counters 0
Policers 0
Group: 8, Mode: DOUBLE, Hw grps used: 2, Tcam apps: 1
Errors
Tcam-Entries 18
Counters 0
Policers 0
Group: 14, Mode: SINGLE, Hw grps used: 1, Tcam apps: 1
Errors
Tcam-Entries 0
Counters 0
Policers 0
Tcam Resource Stage: Egress
---------------------------
No tcam usage
You can see that all the applications using the TCAM resources are in
indicates that the hardware has been successfully configured.
500 500 0
0 X X
Available Errors
512 312
512 312
512 412
200 200 100
command.
Resource-Shortage
0
0
0
Resource-Shortage
0
0
0
Resource-Shortage
0
0
0
Copyright © 2017, Juniper Networks, Inc.
2 OK
1 OK
0
0
0
State
1 OK
state and
OK