Configuring The Vpls Site Name And Site Identifier - Juniper ACX1000 Configuration Manual

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

Copyright © 2017, Juniper Networks, Inc.
NOTE:
You cannot configure both BGP signaling and LDP signaling for the
same VPLS routing instance. If you attempt to configure the statements that
enable BGP signaling for the VPLS routing instance (the
and
site-range
statements) and the statements that enable LDP signaling
for the same instance (the
operation fails.
NOTE:
In the VPLS documentation, the word router in terms such as PE router
is used to refer to any device that provides routing functions.
Configure BGP signaling for the VPLS routing instance by completing the steps in the
following sections:
Configuring the VPLS Site Name and Site Identifier on page 1241
Configuring Automatic Site Identifiers for VPLS on page 1242
Configuring the Site Range on page 1243
Configuring the VPLS Site Interfaces on page 1245
Configuring the VPLS Site Preference on page 1245

Configuring the VPLS Site Name and Site Identifier

When you configure BGP signaling for the VPLS routing instance, on each PE router you
must configure each VPLS site that has a connection to the PE router. All the Layer 2
circuits provisioned for a VPLS site are listed as the set of logical interfaces (using the
statement) within the
interface
You must configure a site name and site identifier for each VPLS site.
To configure the site name and the site identifier, include the
statements:
site site-name {
interface interface-name {
interface-mac-limit limit;
}
site-identifier identifier;
}
The numerical identifier can be any number from 1 through 65,534 that uniquely identifies
the local VPLS site.
You can include these statements at the following hierarchy levels:
[edit routing-instances routing-instance-name protocols vpls]
[edit logical-systems logical-system-name routing-instances routing-instance-name
protocols vpls]
Chapter 35: Configuring Virtual Private LAN Service
and
neighbor
vpls-id
statement.
site
,
site
site-identifier
statements), the commit
and the
site
site-identifier
1241
,

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents